日韩av电影

  • <big id="c0egy"><nobr id="c0egy"></nobr></big>
          1. 全國服務熱線:

            18396804865 錢經理

            等離子切割機電源上調整的參數

            2019-12-21 16:26:43文章來源:www.nicedustcontrolindustries.com490

               在數控等離子切割機電源上調整的參數有:
              The parameters adjusted in the power supply of CNC plasma cutting machine are as follows:
             ?。?)電流:手動旋扭給定(2)PG1引弧氣氣壓及流量:
              (1) Current: Manual twisting given (2) PG1 arcing gas pressure and flow:
             ?。?)PG2切割氣氣壓及流量:
              (3) Gas pressure and flow rate of PG2 cutting:
             ?。?)WG1渦流氣氣壓及流量:
              (4) WG1 swirl gas pressure and flow rate:
             ?。?)WG2渦流氣氣壓及流量:
              (5) WG2 swirl gas pressure and flow rate:
             ?。?)板厚檔位:共3個檔位,根據參數表設定。
              (6) Plate Thickness Gear: There are 3 Gears, which are set according to the parameter table.
              參數有:
              The parameters are:
             ?。?)引弧時間:即穿孔時間,通過鍵盤直接輸入;(2)切割速度:通過鍵盤直接輸入;(3)割縫補償:通過鍵盤直接輸入;(4)引弧高度:即穿孔高度,在割槍部位手動調節;(5)弧壓:在弧壓傳感器上手動調整,該值決定割槍的切割高度。在切割過程中調整時,觀察等離子電源上弧壓顯示值直到與參數表上的值匹配為止。
              (1) arc initiation time: that is, the time of perforation is input directly through keyboard; (2) cutting speed: input directly through keyboard; (3) slot compensation: input directly through keyboard; (4) arc initiation height: that is, the height of perforation, which is manually adjusted at the cutting gun position; (5) arc pressure: manually adjusted on the arc pressure sensor, which determines the value. Cutting height of cutting gun. When adjusting during cutting, the display value of arc voltage on plasma power supply is observed until it matches the value on parameter table.
             

              濟南卓然天成是大型數控火焰切割機廠家,數控等離子切割機廠家,便攜式數控切割機廠家www.nicedustcontrolindustries.com,供應河北數控火焰切割機,山西數控等離子切割機,遼寧便攜式數控切割機,吉林數控火焰切割機,黑龍江數控等離子切割機,江蘇數控切割機,浙江數控切割機,安徽數控切割機,福建切割機,江西切割機,山東數控切割機,臺灣切割機,河南切割機,湖北數控切割機,湖南數控切割機,廣東切割機,海南數控切割機,四川數控切割機,貴州數控切割機,云南切割機,陜西切割機,甘肅數控切割機,青海數控切割機,需要的朋友聯系我們15254176866

            電話咨詢
            郵件咨詢
            在線地圖
            QQ客服
            網站地圖 日韩av电影
          2. <big id="c0egy"><nobr id="c0egy"></nobr></big>